Vivotek ND8322P User Manual

VIVOTEK - Built with Reliability
User's Manual - 127
If the need arises for updating system rmware, acquire the update from VIVOTEK's technical
support or download site. Locate the rmware binaries, and click Upgrade. The upgrade should
take several minutes to complete. Note that during the upgrade, the recording task will be
interrupted.
A Device pack contains information for network cameras that are newly released. It enables the
implementation of new models into your NVR conguration with necessary parameters, and
other tunable imaging features.
5-1-2. System - Upgrade
The Schedule reboot device allows the system to clean up dirty cache by a scheduled reboot.
You can congure a reboot by a specic time within a week. Note that during the reboot the
video recording will be temporarily interrupted.
Scheduled reboot is an recurring event. Select the day within a week and a time for the reboot
using the checkboxes and drop-down menus.

Vivotek ND8322P Specifications

General

Card reader integrated	-
USB 2.0 ports quantity	3
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Power over Ethernet (PoE)	Yes
Ethernet LAN (RJ-45) ports	1
HDD capacity	6144 GB
Maximum storage capacity	12288 TB
Number of HDDs installed	2
Total installed storage capacity	12288 GB
Power consumption (max)	120 W
Certification	CE, LVD, FCC, VCCI, C-Tick, UL
LED indicators	HDD, Power, Status, eSATA
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	0 - 95 %
Maximum resolution	2560 x 1920 pixels
Alarm input channels	8
Video input channels	8 channels
Alarm output channels	4
Video formats supported	H.264
Resolution at capture speed	1920x1080@120fps
Minimum RAM	1 GB

Weight and Dimensions

Depth	311 mm
Width	360 mm
Height	44 mm
Weight	2700 g