VIVOTEK - Built with Reliability
User's Manual - 165
To access live view control,
1.
Click
on a view cell. The view cell will become a focused view cell. The streaming control
buttons will be listed at the bottom of a view cell. These buttons have been discussed on
page 138.
2.
The 2nd click
on a view cell enlarges it to the full of the live view area.
The 3rd click
reduces its size to the original focused view.
3. To deselect a view cell, you can click on another view cell in the display area or click on the
Restore button.
A selected, focused,
view cell.
If you have concerns with the display quality and frame rate per second, refer to page 71 for
how to congure video feeds for live viewing as well as for video recording. The conguration
options can be found in
Settings
>
Camera
>
Video
.
Note that the constant bit rate methodology is applied in this system and it sets an upper
threshold on the size of IP packets sent with the video streams. Image quality will be slightly
compromised if reaching the ceiling of allowable bandwidth.
NOTE:
To Next Page
Loading...
Need help?
General
