Vivotek ND9322P User Manual

VIVOTEK - Built with Reliability
8 - User's Manual
Safety

Connect the system to an earthed main power outlet.

Never open the housing of the power supply unit.

Install and operate the system only in a dry, weather-proof location.

Observe the following safety factors:
•
Is there visible damage to the system or power cord?
•
Is the system operating correctly?
•
Has the system been exposed to rain or moisture?
•
Has the system been in a long storage under harsh conditions or exposed to
unconforming stress?

The relevant electrical engineering regulations must be complied with at all times during
installation.

Ensure that all maintenance and repair work is handled by qualified personnel such as
electrical engineers or network specialists.

Read this manual before installing or operating the system. The documentation contains
important safety instructions about permitted uses.

The rated AC input is:
100-240V~ 3.5A, 60-50Hz
; the max. consumption:
170W (ND9322P)
,
250W (ND9424P)
.

If a fault occurs, disconnect the power cord from the power supply.

Do not install the system close to heaters or other heat sources. Avoid locations with direct
sunlight.

All ventilation openings must not be blocked.

Use only the cables shipped with system or use appropriate cables that can withstand elec-
tromagnetic interference.
● PTZ Support
● Snapshot / Export Media
● Digital zoom Video Control
● VIVOCloud for effortless access from cell phones using a QR code
● Terminal block pins for DI/DO connection.
● Configuration Backup / Restore
● Compatible with VIVOTEK VAST Central Management Software*
● Integration with VIVOTEK Network Cameras
● VIVOTEK iViewer Support (iOS/Android cellphone/hand-held devices)
*The VIVOTEK VAST Central Management Software is not included in the package.

Vivotek ND9322P Specifications

General

Brand	Vivotek
Model	ND9322P
Category	Network Hardware
Language	English