VIVOTEK - Built with Reliability
58 - User's Manual
3-5. Settings
Click the Settings button to start the camera and system settings window. A
conrm box will prompt. Enter User name and Password to proceed.
The system will default to the overview page displaying the camera connection and
storage statuses. An empty position will be left in blank, and a disconnected camera will
be indicated as . The storage volume usage is displayed as the used and unused
spaces.
The
Stop Buzzer
,
Reboot
, and
Power-down
buttons are also available on this page.
There are critical conditions that can sound the system buzzer, such as a disk failure.
3-5-1. Settings - Overview
To Next Page
Loading...
