Vivotek ND9322P - Settings-Camera-PTZ Settings

VIVOTEK - Built with Reliability
User's Manual - 79
To congure PTZ preset positions:
1. Select a PTZ camera by a single click.
2. Use the PTZ panel to move to a eld of view where you want to designate as a
preset position.
3. Click the add button, and enter a name for the position. Press Enter to proceed.
Repeat the conguration to create more positions.
4. Click the
Apply
button for the conguration to take effect.
Note that the PTZ panel can vary with different PTZ cameras.
3-5-8. Settings–Camera–PTZ settings
1
2
3
4