VIVOTEK - Built with Reliability
User's Manual - 65
Camera position
To change a camera's position on the Liveview layout, click and drag a camera to an
unpopulated position. Note that you cannot swap the positions of two cameras by
dragging a camera onto a position already populated by the other. Also, the camera
index number on the management list is not affected by the change of positions.
Click the
Apply
button for the conguration change to take effect. The position screen
displays the current layout on the Liveview screen.
1.
Wi-Fi (SSID)
: Displays the AP (Access Point) this camera is connected to.
2.
Security mode
: Displays the security mode used for the security encryption.
3.
Encryption
: Displays the encryption standard currently applied.
To Next Page
Loading...
Need help?
General
