Vivotek ND9425P User Manual

VIVOTEK - Built with Reliability
User's Manual - 119
11. When the NVR has little reserved power budget, and you attach a new camera, the NVR will
stop supplying power to the new camera.
9. The PoE automatic enlistment does not apply for cameras that come with preset credentials,
namely, password-proteced.
10. The PoE port status can reect the following situations:
A. PoE enable –PoE is working (port icon displayed in green on the upper-right screen)
B. PoE turned OFF –PoE manually disabled (turned to OFF)
C. PoE turned OFF –Port power overload (under camera name)
D. PoE turned OFF –Total power overload (under camera name)
E. PoE turned OFF –Abnormal power supply voltage(under camera name)
F. PoE turned OFF –Non-standard powered device (under camera name)
G. PoE turned OFF –Port error (under camera name)
The UI text on PoE power consumption will turn red if the total power budget is exceeded. A
warning event message will be delivered as push notication or via email.

Vivotek ND9425P Specifications

General

PTZ control	Yes
Maximum resolution	3840 x 2160 pixels
Video input channels	16 channels
Audio formats supported	G.711, G.726
Video formats supported	H.264, H.265
Operating system installed	Embedded LINUX
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN data rates	10, 100, 1000 Mbit/s
VGA (D-Sub) output ports	1
HDD size	3.5 \
RAID levels	0, 1
HDD capacity	0 GB
HDD interface	USB 3.2 Gen 1 (3.1 Gen 1)
Maximum storage capacity	16 TB
Number of HDDs installed	0
Product color	Black
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	255 W
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	0 - 95 %

Weight and Dimensions

Depth	320.3 mm
Width	366 mm
Height	46 mm
Weight	2500 g