EasyManuals Logo

Vivotek ND9425P User Manual

Vivotek ND9425P
173 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #138 background imageLoading...
Page #138 background image
VIVOTEK - Built with Reliability
138 - User's Manual
3-5-24. Settings - Network
Settings - Network - IP
Primary DNS: The primary domain name server that translates hostnames into IP addresses.
Secondary DNS: Secondary domain name server that backups the Primary DNS.
DHCP: Default is selected, the server obtains an available dynamic IP address assigned by the DHCP
server each time the system is connected to the LAN.
Manual setup: Select this option to manually assign a static IP address to the NVR.
Enter the Static IP, Subnet mask, Default router, and Primary DNS provided by your ISP.
Subnet mask: This is used to determine if the destination is in the same subnet. The default value is
“255.255.255.0”.
Default router: This is the gateway used to forward frames to destinations in a di󰀨erent subnet. Invalid
router setting will fail the transmission to destinations in di󰀨erent subnet.
When nished with the network settings, click on the Apply button.
The NVR comes with a default gateway and the cameras connected to the PoE ports are assigned
with IPs within a separate network segment. The cameras connected to the PoE ports will be in a
10.1.1.x segment, automatically provided with subnet addresses.
The NVR’s uplink port will listen to DHCP server by default.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vivotek ND9425P and is the answer not in the manual?

Vivotek ND9425P Specifications

General IconGeneral
PTZ controlYes
Maximum resolution3840 x 2160 pixels
Video input channels16 channels
Audio formats supportedG.711, G.726
Video formats supportedH.264, H.265
Operating system installedEmbedded LINUX
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN data rates10, 100, 1000 Mbit/s
VGA (D-Sub) output ports1
HDD size3.5 \
RAID levels0, 1
HDD capacity0 GB
HDD interfaceUSB 3.2 Gen 1 (3.1 Gen 1)
Maximum storage capacity16 TB
Number of HDDs installed0
Product colorBlack
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)255 W
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth320.3 mm
Width366 mm
Height46 mm
Weight2500 g

Related product manuals