VIZIO VA26L HDTV10T User Manual
Version 6/5/2008 18
www.VIZIO.com
Using Composite Video (Good)
1. Turn off your HDTV and set-top box.
2. Connect the video cable (yellow) from your set-top box to the AV 1 jack (yellow) on the back of
your HDTV.
3. Connect the audio cables (white and red) on your set-top box to the corresponding L and R
AUDIO jacks on the back of your HDTV.
4. Turn on your HDTV and set-top box.
5. Press AV on the remote control to view the content. You can also press INPUT on the remote
control.
NOTE: If AV1 is being used, connect to the AV2 (side) port instead.
Using Coaxial (Antenna) (Good)
1. Turn off your HDTV and the set-top box.
2. Connect the coaxial (antenna) cable from your set-top box to the DTV/TV
CABLE/ANTENNA jack on the back of your HDTV.
3. Turn on your HDTV and the set-top box.
4. Press TV on the remote control to view the content.
You can also press INPUT on the remote control.
To Next Page
Loading...
Need help?
General
