VIZIO VA26L HDTV10T User Manual
Version 6/5/2008 22
www.VIZIO.com
Using S-Video (Better)
1. Turn off your HDTV and set-top box.
2. Connect the S-VIDEO cable from your set-top box to the S-VIDEO
jack on the side of your HDTV.
3. Connect the audio cables (white and red) on your
set-top box to the corresponding L and R AUDIO
jacks on the side of your HDTV.
4. Turn on your HDTV and set-top box.
5. Press AV on the remote control to view the
content. You can also press INPUT on the remote
control.
Using Composite (AV) Video (Good)
1. Turn off your HDTV and DVD player.
2. Connect the Video cable (yellow) from your DVD
player to the AV/S-VIDEO jack on the back of your
HDTV.
3. Connect the audio cables (white and red) on your DVD player to the AV/S-VIDEO L and R
AUDIO jacks on the back of your HDTV.
4. Turn on your HDTV and DVD Player.
5. Press AV on the remote control to view the content. You can also press INPUT on the remote
control.
NOTE: If AV1 is being used, connect to the AV2 (side) port instead.
To Next Page
Loading...
Need help?
General
