Voith BTS User Manual

BTS, non
-contacting thermal switch unit
Safety
Installation and Operating Manual / Version 10 / 3626-011500 en / Protection Class
0: public / 2017-12-15
14
5.1.2 Definition of safety symbols
Symbol
Definition
Danger of explosion
Marking with the Ex-symbol indicates possible hazards which have to be
observed for the use in potentially explosive atmospheres.
Table 3
5.2 Intended use
–
The non-contacting thermal switch unit (BTS) serves for the non-contacting
temperature monitoring of Voith turbo couplings. Any use beyond that described
herein, e.g. for operating or application conditions that have not been agreed
upon, is deemed unintended.
–
Intended use also includes observing this installation and operating manual.
–
The manufacturer is not liable for any damages resulting from unintended use.
The risk has to be borne solely by the user.
5.3 Unintended use
–
Design range is not met.
–
Any use beyond that described herein, e.g. for higher powers, higher speeds, or
operating conditions that have not been agreed upon, is deemed unintended.
–
Moreover, it is not permitted to use BTS non-contacting thermal switch units from
third parties.
5.4 General information as to dangerous situations
For all work performed on the non-contacting thermal switch unit, please ob-
serve the local regulations for the prevention of accidents as well as the regula-
tions for installation of electrical equipment!
WARNING
Explosion hazard
In case of non
-compliance with the
regulations or impermissible change, there is
the danger of explosion.
•
When using the non-
contacting thermal switch unit in potentially explosive
atmospheres, observe the local regulations applicable to electrical equipment
in potentially explosive atmosph
eres! Changes on electrical equipment for
potentially explosive atmospheres, including connecting lines, are not
permitted.
Design range

Operating manual
of
turbo coupling

Voith BTS Specifications

General

Brand	Voith
Model	BTS
Category	Switch
Language	English