Installation and Operating Manual / Version 10 / 3626-011500
en
/ Protection class 0: public / 2017-12-15
BTS, non-contacting thermal switch unit
Hazards while working on the non-contacting thermal switch unit:
On account of incorrectly mounted or incorrectly connected electrical
components, and disconnected electric connections, persons could get an
electric shock and be severely injured, possibly with fatal consequences.
Incorrectly mounted or incorrectly connected electrical components and
disconnected electric connections may cause damages to the machine.
A qualified electrician has to properly carry out the connection to the electric
supply network considering the system voltage and the maximum power con-
sumption!
The system voltage has to be in conformity with the system voltage indicated
on the nameplate!
There has to be a corresponding electrical protection by a fuse on the
network side!
Electric shock:
charging may injure persons by an electric shock.
Allow only a qualified electrician to install the equipment into which the turbo
coupling is installed.
Machine and electric installation are provided with grounding connections.
To Next Page
Loading...
General