-contacting thermal switch unit
Installation and Operating Manual / Version 10 / 3626-011500
en / Protection Class
0: public / 2017-12-15
Working on the turbo coupling:
While working on the turbo coupling, there is the risk of injury through cutting,
crushing, burns and cold burns in case of minus degrees.
Please observe the installation and operating manual of the turbo coupling!
Never touch the turbo coupling without wearing protective golves.
Start to work on the turbo coupling only after it has cooled down.
Ensure that there is sufficient light, a sufficiently large working space and
good ventilation when working on the turbo coupling.
Switch off the unit in which the turbo coupling is installed and secure the
switch against inadvertent switch-on.
For all work performed on the turbo coupling ensure that both the drive motor
and the driven machine have stopped running and that a re-
start is
absolutely impossible!
Noise:
Hearing loss, permanent impairment of hearing
The turbo coupling generates
noise during operation. If the A-
classified
equivalent sound pressure level L
PA, 1m
exceeds 80 dB(A), this may cause
impairment of hearing!
level
cover sheet of
operating manual of
turbo coupling
To Next Page
Loading...
General