VOLTCRAFT DL-210TH User Manual

66
8. LED STATUS DISPLAY
LED indicator Description
Green LED
control light (3)
is ashing.
Measured value(s) are within the congured limits of
low and high alarm.
Red LED
control light (2)
is ashing.
Memory is full.
Measured value(s) are exceeding congured limits of
low and high alarm.
In mode “START UPON KEYPRESS” or “STOP
TIME” recording has been terminated. (In order to
start recording again, re-congure data logger.)
In mode “START UPON KEYPRESS”, data logger is
ready to start recording. (In order to start recording
hold button ENTER (8) pressed for few seconds.)
Red LED
control light (2)
is continuously
on.
Data logger is generating PDF report.
Green LED
control light is
ashing twice.
Conguration was successful.
Firmware has been updated successfully.
No LED light
is on.
LED-alarm was disabled during conguration.

VOLTCRAFT DL-210TH Specifications

General

Brand	VOLTCRAFT
Model	DL-210TH
Category	Data Loggers
Language	English