79
• For further instructions regarding loading the existing conguration
settings, please refer to “Other settings” on page 77.
• For further instructions regarding entering the function menu, please
refer to “a) Enter function menu” on page 87.
12. OVERVIEW OF OPERATION MODES,
SETTINGS AND LC DISPLAY INDICATIONS
a) Operation modes and settings
For performing following conguration settings, please refer to
““MEASUREMENT” options - “BASIC SETTING”” on page 72.
Mode 1
Function Logging starts immediately.
Logging stops when memory is full.
Setting • Select “IMMEDIATELY UNTIL MEMORY FULL” as
“RECORD START CONDITION”.
Mode 2
Function Logging starts immediately.
Logging stops when button ENTER is pressed for few
seconds.
Setting • Select “IMMEDIATELY UNTIL MEMORY FULL” as
“RECORD START CONDITION”.
• Select “STOP BUTTON” as “STOP STYLE”.
To Next Page
Loading...
Need help?
General
