VOLTCRAFT DL-210TH - Alarm Settings

75
“ENABLE
DISPLAY”
Remove the checkmark from the check box to turn off
the LC display, or check the checkbox to turn on the
LC display.
When using the data logger at extremely low
temperatures, choose a longer sampling rate to
decrease power consumption and to prolong the
battery life.
“MEASUREMENT” options - “ALARM SETTING”
Congure alarm settings in the “Measurement” tab:
“ENABLE
LED
ALARM”
The LED alarm indicates when a measured value is
outside the dened range.
To disable the LED alarm, remove the checkmark in
the checkbox.
To enable the LED alarm, check the checkbox .
When using the data logger at extremely low
temperatures, disable the LED alarm to
decrease power consumption and to prolong the
battery life.
“LIMIT
PAUSE
FUNCTION”
During recording, the limit alarm can be suspended.
Select “ENABLE” or “DISABLE” to enable/disable the
pause function.
Pause function will not stop the recording.