80
Mode 3
Function Logging starts immediately.
Logging stops after PDF report generation.
Setting • Select “IMMEDIATELY UNTIL MEMORY FULL” as
“RECORD START CONDITION”.
• Select “AFTER PDF CREATED” as “STOP STYLE”.
Mode 4
Function Logging starts when button ENTER is pressed for few
seconds.
Logging stops when memory is full.
Setting • Select “START UPON KEYPRESS” as “RECORD
START CONDITION”.
Mode 5
Function Logging starts and stops when button ENTER is pressed
for few seconds.
Setting • Select “START UPON KEYPRESS” as “RECORD
START CONDITION”.
• Select “STOP BUTTON” as “STOP STYLE”.
Mode 6
Function Logging starts when button ENTER is pressed for few
seconds.
Logging stops after PDF report generation.
Setting • Select “START UPON KEYPRESS” as “RECORD
START CONDITION”.
• Select “AFTER PDF CREATED” as “STOP STYLE”.
To Next Page
