4.Advanced User Guidebook
3. Click Reload Disk on the pull-down menu at the top left or push keyboard F5,
and information about the USB disk will display on the right side with red mark
1 and 2.
Figure 4- 6: Reload Disk
4. Right click 1 or 2 red mark area, choose Format.
Figure 4- 7: Choose format
5. Set File System FAT32, Cluster size 4096. Click OK.
Figure 4- 8: Format setting
6. Click Apply at the top left of the menu. Then click Yes on the pop-up warning
To Next Page
Loading...
