4.Advanced User Guidebook
cursors active. Select Line in the right menu as a or b, turn the M knob to
move it.
6. Push the horizontal HOR button to enter wave zoom mode. Push Cursor
to show the right menu, select Window as Main or Extension to make the
cursors shown in the main window or zoom window.
Figure 4- 15 Time&Voltage Cursor Measurement
Auto Cursor
For the AutoCursr type, the horizontal cursors are set as the intersections of the
vertical cursors and the waveform.
The Cursor Measurement for FFT mode
In FFT mode, push the Cursor button to turn cursors on and display the cursor
menu.
To Next Page
Loading...
