• Switch off the mains socket to which the product is connected
(switch off at the corresponding circuit breaker or remove the safety
fuse, then switch off the residual current operated circuit breaker).
Then unplug the product from the mains socket.
Discontinue use of the product and take it to a specialised workshop
or dispose of it in an environmentally friendly manner.
• Safe operation can no longer be assumed if:
- there are signs of damage
- the product does not work at all or works poorly (leaking smoke
or a smell of burning, audible cracking noises, discolouration to
the product or the adjacent surfaces)
- the product was stored under unfavourable conditions
- the product was mishandled during transport
• If the product is not going to be used for an extended period of
time (e.g. storage), disconnect it from the power supply removing by
removing it from the mains socket. Keep it in a dry, cool place and
out of the reach of children.
• Never pour liquids above or near the product. This constitutes a
seriousrehazardandmayresultinafatalelectricalshock.
If any liquid has managed to enter the device, immediately switch
off the power supply to the mains socket at which the product is
connected (deactivate the fuse/circuit breaker/residual current oper-
ated circuit breaker of the associated circuits). Only then can you
unplug the product from the mains socket and contact a specialist.
Discontinue use of the product.
43
To Next Page
Loading...
Need help?
General
