50
8. DISPLAY INDICATION AND SYMBOLS
Delta symbol for relative value measurement (=reference value measurement)
AUTO Automatic measuring range selection
MANUAL Manual measuring range selection
TrueRMS True root mean square
H Data hold function
COMP Comparative mode
Threshold determination, measured value must remain within the two determined
values
Threshold determination, measured value must remain outside the two
determined values
NG Comparative test not passed
PASS Comparative test passed
MEM Memory
MR Restore memory
OL Overload (measuring range exceed)
Battery replacement symbol (low battery level)
Diode test
Acoustic continuity tester
~ AC Alternating current for voltage and current
DC Direct current for voltage and current
mV millivolt (= 0.001 V)
V Volt (unit of electric voltage)
A Ampere (unit of electric current)
mA milliampere (= 0.001 A)
µA Microampere (=0.000001 A)
Hz Hertz (unit of frequency)
kHz Kilo Hertz
MHz Mega Hertz
VA Voltampere (unit of electric apparent power)
% Percentage (for duty cycle measurement)
ºC Degree Celsius (unit of temperature)
ºF Degree Fahrenheit (unit of temperature)
To Next Page
Loading...
Need help?
General
