66
Close the fuse compartment and turn the two screws on top of the product from the position “OPEN”
to “CLOSE” to lock the storage compartment.
In addition to the fuses (for the measuring leads) in the fuse compartment, there is a mains fuse next
to the mains inlet (23).
Proceed as follows to replace the mains fuse:
1. Remove all the connection cables and the mains plug from the device.
2. Lever the mains fuse from the bracket using a suitable screwdriver.
25. TROUBLESHOOTING
In purchasing the DMM, you have acquired a product designed to the state of the art that is
operationally reliable.
Nevertheless, problems or errors may occur.
For this reason, the following is a description of how you can easily remove possible malfunctions
yourself:
Always follow the safety instructions!
To Next Page
Loading...
Need help?
General
