Voltech PM100 User Manual

PM100 / 300 USER MANUAL EMC COMPLIANCE
VPN 98-052 PAGE 33
EMC PRECAUTIONS
Conducted and Radiated Emissions
The PM100 and PM300 comply with the limits of BS EN 55022 Class A.
To ensure continued compliance, the RS232 lead supplied for PC communications must be fitted with the
ferrite at the analyzer end.
Any other RS232 or Parallel Printer leads used should have a ferrite fitted at the end of the lead closest to the
analyzer.
Immunity
The PM100 and the PM300 may be susceptible to Fast Electrical Transients on the power line and Electrostatic
Discharges, which can disrupt the operation of the units.
In the event of such an occurrence, to return the PM100 or PM300 to normal operation:
1) Switch off the power
2) Wait 5 seconds
3) Switch on again

Voltech PM100 Specifications

General

Brand	Voltech
Model	PM100
Category	Measuring Instruments
Language	English