EasyManua.ls Logo

Volvo Penta D11 - Gauges

Volvo Penta D11
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Gauges
Tachometer
The tachometer displays engine speed; multiply the
value shown on the dial by 1,000 to get the number of
engine revolutions per minute.
Boat and engine information is displayed in the tach-
ometer window. Information displayed depends on
engine type, the number of sensors and which acces-
sories are installed.
Optional instruments
These instruments are sold as engine options by Volvo
Penta.
1 Fuel level gauge
The fuel level gauge shows the quantity of remain-
ing fuel.
2 Voltmeter, battery charging
The meter shows the alternator charge current.
During operations the charge voltage should be
around 14 V. When the engine is stopped and elec-
trical power switched on the battery voltage should
be around 12 V.
If a 24 V system is installed, the charge voltage
should be around 28 V during operations.
3 Coolant temperature gauge
The instrument shows engine coolant temperature.
During operations coolant temperature should nor-
mally be between 75-90°C (167-194°F).
4 Oil pressure gauge
The oil pressure gauge displays engine oil pres-
sure. During operations the oil pressure gauge
should normally show 4-5.5 bar. At idle, lower val-
ues are normal.
5 Rudder position indicator
The instrument shows rudder position.
6 Fresh water level sensor
Freshwater tank level gauge.
7 Alarm monitor
The alarm monitor gives a visual warning to call
attention to any alarms that occur.
1
P0005255
Instruments and Controls
12 7748887 04-2008

Table of Contents