Ceramic Master Е1000 en v3 20
2. Power consumption
2.1. Furnace with vacuum pump
2.2. Furnace without vacuum pump
3. Category of overtension
4. Vacuum pump data
4.1. Suction capacity
4.2. Regulated vacuum level
5. Maximal firing temperature
6. Effective firing chamber dimensions
7. Overall dimensions of closed furnace:
7.1. Width
7.2. Length
7.3. Height
8. Model Weight
9. Number of programs
10. Working temperature
11. Level of environment pollution
12. The device is designed for usage in normal dental
premises up to 2000 m altitude above sea level.
13. The maximum relative humidity of the air must
be 80% for temperatures up to 31°С, decreasing
lineally to 50% relative humidity for temperature
40°С.
14. Working modes
14.1. Programming mode
Programming of the parameters is fully
described in chapter 7. PROGRAMMING.
14.2. Working mode
It shows the number of the executed program
and the parameters’ value of the ongoing
program phase.
The values of all parameters could be seen if
you use the Multi Functional Rotary Knob
MFRK.
~230 V, ±10%, 50/60Hz
1700 W
1550 W
ІІ
22 l/min
от 0.1 до 0.9 bar
1200°С
Ф 95 мм; h 46 мм
370 мм
380 мм
740 мм
26 кg
100
5°С - 40°С
2
10. MAINTENANCE
To Next Page
Loading...
