Ceramic Master Е1000 en v3 3
1. INTRODUCTION
Thank you for having purchased the CERAMICMASTER
Е1000 furnace which, we are sure will all meet all your
needs and will satisfy your high demands.
This furnace has been designed according to the
requirements of latest industrial standards and we
guarantee that you will use it many years as your closest
assistant.
The furnace has a kit for auto calibration that can be
purchased separately. For more information, see section
11 AUTOCALIBRATION.
However, inappropriate use may damage the
equipment and be harmful to personnel. Please observe
the relevant safety instructions and read the Operating
Instructions carefully.
We wish you pleasant and fruitful work with the
CERAMICMASTER Е1000.
SYMBOLS:
This symbol indicates that there is high
dangerous tension under the bonnet which it is
put on.
This symbol indicates that the machine
complies with the requirements of the Directives
for Low Tension and Electromagnetic
Compatibility as well as for the Standards
harmonized with them.
To Next Page
Loading...
