Ceramic Master Е1000 en v3 22
12. DELIVERY SCOPE
PRODUCER:
ААААА is the value measured by ADC
The furnace beeps at the end of the program.
Perform the following actions:
Take out the plug from the socket ACAL;
Remove the auto calibration kit;
Place the working ceramic tray again.
Press the STOP button;
Once you press the STOP button, the furnace is restarted
and is ready for operation.
Furnace CERAMICMASTER PRESS 1 pc.
Vacuum pump PVD-M22 1 pc.
Power cable 1 pc.
Flexible tube for the vacuum 1 pc.
Spare fuses
1.25А/250V 1 pc.
8A/250V 2 pc.
User Manual
“VOP” Ltd.
2140 IZ “Microelectronika”
Botevgrad, Bulgaria
Теl. 0723 66303
Теl./Fax 0723 66304
To Next Page
Loading...
