5
WWW.VORONDESIGN.COM
HOW TO GET HELP
If you need assistance with your build, we’re here to help. Head on over to our Discord group, Forum, or to Reddit and post
your questions. We have a great community that can help you if you get stuck.
https://discord.gg/voron
https://forum.vorondesign.com/
PRIMARY COLOR
Example Tap_Front_r1.stl
These les will have nothing at
the start of the lename.
PART VERSIONING
Example Tap_Front_r1.stl
Part names will have a revision
number at the end (e.g., “r1”)
Always see the Github
repository for the latest parts.
ACCENT COLOR
Example [a]Tap_Center_r1.stl
We have added “[a]” to the front
of any STL le that is intended to
be printed with accent color. The
parts are marked with a heart in
the manual.
FILE NAMING
The STL les for our parts are available in our Github repository. The parts use this naming convention:
BEFORE WE BEGIN
https://www.reddit.com/r/VORONDesign
To Next Page
Loading...
