4
WWW.VORONDESIGN.COM
PRINT SETTINGS
PART PRINTING GUIDELINES
The Voron Team has provided the following print guidelines for you to follow in order to have the best chance
at
success with your parts. There are often questions about substituting materials or changing printing
standards, but we recommend you follow these:
3D PRINTING PROCESS
Fused Deposition Modeling (FDM)
MATERIAL
ABS or ABS+
LAYER HEIGHT
Recommended: 0.2mm
EXTRUSION WIDTH
Recommended: Forced 0.4mm
INFILL TYPE
Grid, Gyroid, Honeycomb, Triangle or Cubic
INFILL PERCENTAGE
Recommended: 40%
WALL COUNT
Recommended: 4
SOLID TOP/BOTTOM LAYERS
Recommended: 5
To Next Page
Loading...
