Vortex IR610 Series - Page 50

IR610 high performance vector control frequency inverter user manual Chapter 5 function code table
- 46 -
Function
code
Parameter name
Description
Default
Property
running direction by giving frequency
symbol to be reverse)If command by
keypad/terminal /communication,and not
want to achieve reverse running by
giving frequency symbol to be
reverse,need to change P22.13 in stop
mode(see parameter P22.13)
P00.09
Reverse control
0：enable
1：disbale
0
★
P00.10
Motor option
0：motor 1
1：motor 2
If use with DI function,16:Switch between
motor 1 and motor 2,Actuall effective
command source is related with DI status
0
★
P00.11
Special industry
0：standard drive
1：Reserved
0
★
r00.18
Power board software
version
-
-
●
r00.19
Control board software
version
-
-
●
r00.21
SN 1
-
-
●
r00.22
SN 2
-
-
●
Functio
n code
Parameter name
Description
Default
Property
01Group frequency source selction
P01.00
Main frequency source
selection (A)
0：Digital setting
1：AI1
2：AI2
3：AI3(IO externsion card)
4：AI4(IO externsion card)
0
★