Vortex IR610 Series - Page 51

- 47-
Functio
n code
Parameter name
Description
Default
Property
5：HDI
6：multi-step speed
7：communication
8：PID
9：Internal PLC
Notice:DI terminal function code 26-32
superior than this function code
P01.01
Auxiliary frequency
source selection (B)
Same as P01.00
Notice:DI terminal function code 33 superior
than this function code
0
★
P01.02
Reference option for
auxiliary frequency
source
0：Relative to Maximum frequency
1：Relative to main frequency
0
★
P01.03
Auxiliary frequency gains
0.0～300.0
100.0%
☆
P01.04
Frequency source
selection
0：main frequency sourceA
1：auxiliary frequency sourceB
2：Main and auxiliary arithmetic results
3：Switchover between main and auxiliary
frequency
4：switchover between main frequency source
A and A+B Arithmetic results
5：Switchover between B and (A+B)
（*）DI function code 25 effective to
corresponding terminal ,frequency will adopt
the latter
0
★
P01.05
Main and Auxiliary
arithmetic
0：A+B
1：A-B
2：The bigger of main A and Auxliary B
3：The smaller of Main A and Auxiliary B
4：A*B
A*B have better frequency adjustment ,wiely
used for winding industry, fine sand machine,
and leather, paper industry...
0
★