Vox StompLab IB - Front Panel Overview; CATEGORY Selector and VALUE 1 Knob

4
Introduction
Welcome!
Thank you for adding the VOX StompLab I B Modeling Bass
Guitar Eect Processor to your rig. Whether you’re playing live,
in the studio, or practicing with headphones, the StompLab will
give you countless hours of great sounds!
To ensure a long and trouble-free relationship with your StompLab,
please read this manual carefully. When you’ve nished reading
this manual, please keep it for future reference.
Main features
q60 dierent modeling eect variations are built-in, and you
can use up to seven dierent eects simultaneously (including
noise reduction).
qUse these modeling eects to create your own sounds and
store them in internal memory as one of 20 user programs.
In addition, 100 more programs are provided as presets for
immediate use.
qA built-in auto chromatic tuner lets you tune while bypassed
or muted.
Front and rear panel
This section explains the buttons and connectors on the
StompLab I B’s front and rear panels.
Front panel
1
4
7
2
3
5
6
8
1. CATEGORY selector
In Program select mode, use this to select the program genre and
to recall the selected genre of the program.
In Edit mode, use this to select the eect that will be edited.
Also, you can save the seings of an edited eect in a program
when [WRITE] is selected with the selector.
2. VALUE 1 knob
In Program select mode, use this knob to adjust the limiter
sensitivity or amplier gain (AMP/DRIVE). When making this
adjustment, the program/value display will indicate the sensitivity
or gain value and the EDIT LED and Tuner center LED will blink.
In Edit mode, use this knob to set the rst parameter of an eect.
Also, when saving a program, use this knob to select the program