VTech Cordless Telephone User Manual

www.vtechphones.com
16
Conference call
It is possible to establish a conference call between two handsets and
the external line.
While one handset is already connected to the external line, the other
handset can join the call by pressing . A conference call will be
immediately established, both handsets will show:
Find handset
• To locate a misplaced handset, press FIND HANDSET on the base to
page all system handsets.
• To end the page at the base, press FIND HANDSET again.
• To end the page at the handset, press
, SPEAKER, or any dial pad
key (0-9, *, #).
Handset operation
PHONE 00:00:25
** PAGING **
• For the FIND
HANDSET
function to work,
the system
handsets need
to be in idle (off)
mode.
• Pick up the intercom call on HS2 by pressing /FLASH.
• An intercom call is established and HS1 can communicate with HS2 prior to the external call being
transferred. CALL TRANSFERRED will briey display on HS1.
If the transferred call is not answered within 100 seconds, the external call will be returned to HS1
and the screen will show CALL BACK.
Voice mail
If you subscribe to voice mail service provided by your telephone company,
you can receive voice mail messages from callers. When you have a new
voice mail, the screen will display NEW VOICE MAIL, and the voice mail
indicator will ash.
On how to access your voice mail, contact your local telephone company
for further instruction.
HANDSET 1
NEW VOICE MAIL

VTech Cordless Telephone Specifications

General

Caller ID	Yes
Call Waiting	Yes
Speakerphone	Yes
Backlit Display	Yes
Intercom	Yes
Number of Handsets	Varies by model (1-6)
Answering Machine	Varies by model (some models)