VTech Cordless Telephone User Manual

www.vtechphones.com
6
Connect power to base unit/chargers
1. Plug the power adapter into an electrical outlet not controlled by a wall switch, and the
connector into the bottom of the base unit.
2. Choose the location for your charger, and plug its power supply into an electrical
outlet.
To power outlet
To telephone outlet
Installation
Connect to phone
Plug one end of the telephone line cord into the telephone line jack at the bottom of the telephone
base. Then plug the other end of the cord into the wall telephone outlet.
• CAUTION: To reduce
the risk of re or injury,
read and follow these
instructions:
1. Use only the battery
supplied, or equivalent.
2. Do not open or
mutilate the battery.
Released electrolyte
is corrosive and may
cause damage to the
eyes or skin It may be
toxic if swallowed.
3. Exercise care in
handling battery in
order not to short the
battery with conducting
materials such as
rings, bracelets, and
keys. The battery or
conductor may overheat
and cause burns.
• if you need to install
your phone within the
same room as other
cordless phones or
wireless products, you
may need to select
a different channel
for your router and or
change the channel on
your phone’s handsets.
• Connect the power and
telephone line cords
to the underside of the
base as illustrated.

VTech Cordless Telephone Specifications

General

Caller ID	Yes
Call Waiting	Yes
Speakerphone	Yes
Backlit Display	Yes
Intercom	Yes
Number of Handsets	Varies by model (1-6)
Answering Machine	Varies by model (some models)