VTech Cordless Telephone User Manual

www.vtechphones.com
9
Getting started
The wall mount brackets are designed for use on standard wall mount plates only.
1. Plug the connector of the base power adaptor to the connector jack at the bottom of the base unit.
Then plug the adaptor into an electrical outlet.
2. Connect the telephone line cord to the jack at the bottom of the base unit, and the other end to
the wall jack.
3. Line up the tabs on the wall mount adaptors with the holes at the bottom of the base unit/back of
the charger. Snap the wall mount bracket rmly in place.
4. Mount the base unit on the wall. Position the base unit so that the mounting studs will t into the
holes on the wall mount bracket. Slide base unit down on the mounting studs until it locks into
place.
Wall mounting (optional)

VTech Cordless Telephone Specifications

General

Caller ID	Yes
Call Waiting	Yes
Speakerphone	Yes
Backlit Display	Yes
Intercom	Yes
Number of Handsets	Varies by model (1-6)
Answering Machine	Varies by model (some models)