VTech Cordless Telephone User Manual

www.vtechphones.com
25
Basic operation
Handset settings
• The handset will
not ring when a
call comes in if
ringer volume is in
the lowest setting.
Ringer volume
• From the idle (off) mode, press SEL then or until RINGER
VOLUME is shown.
• Press
SEL. The current ringer volume will be shown:
• Press
and or enter a digit (0 through 6) to the desired ringer
volume. The current ring tone will play and the volume bar is
increased or decreased each time the setting is adjusted. At the
lowest setting the display will show:
- OR -
• From idle (off) mode, press +/- volume control keys on the side
of handset will directly go to the RINGER VOLUME menu.
• Press
and to the desired ringer volume. Ringer volume will
be adjusted.
Ring tone
• From the idle (off) mode, press SEL then or until RINGER
TONE is displayed.
• Press
SEL. You can then use or or enter a digit (0 through
9) to sample the ring tone.
• Press
SEL to conrm.
Key tone
• From the idle (off) mode, press SEL then or to KEY
TONE.
• Press
SEL. The current setting will be shown. Press or to
scroll to ON or OFF. When set to ON, the handset will emit a beep
whenever a key is pressed.
• When the desired option is shown, press
SEL.

VTech Cordless Telephone Specifications

General

Caller ID	Yes
Call Waiting	Yes
Speakerphone	Yes
Backlit Display	Yes
Intercom	Yes
Number of Handsets	Varies by model (1-6)
Answering Machine	Varies by model (some models)