VTech Cordless Telephone User Manual

www.vtechphones.com
5
Getting started
Installation
Install handset battery
1.
2.
1. Align the two holes in the plug with
the socket pins, then snap the plug
into place.
2. Place the battery in the compartment with
the wires in the upper right corner.
3. Replace cover by sliding it upwards until
it clicks into place.
4. Be sure to charge the battery for 16 hours
before using your phone.
• Use only the provided
VTech battery, or
equivalent.
• Place the handset in
its base or charger
when not in use to
ensure optimum
performance.
1
3
Choose a location
For maximum performance of your
cordless telephone system:
1. Choose a central location for your
base unit.
2. Install your phone(s) as far
away as possible from any other
cordless (wireless) device such
as cordless telephones, 802.11
wireless router (for example,
WiFi).
3. Install your phone(s) as far away
as possible from other electronic
equipment such as microwave
ovens, televisions, computers,
etc.
4. Install your telephone equipment
away from heat sources and direct
sunlight.
5. Avoid excessive moisture, dust or
extreme cold.

VTech Cordless Telephone Specifications

General

Caller ID	Yes
Call Waiting	Yes
Speakerphone	Yes
Backlit Display	Yes
Intercom	Yes
Number of Handsets	Varies by model (1-6)
Answering Machine	Varies by model (some models)