16
Telephone operation
Join a call in progress (for CS6114-2 only)
You can use both handsets at a time on an outside call.
To share an outside call:
When a handset is already on a call and you would like to join the call, press on
the other handset to join the call.
To exit the call, press OFF or place the handset in the telephone base or charger.
The call continues until all handsets hang up.
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the directory,
caller ID log or redial while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as bank
account numbers or access codes) from the directory, caller ID log or redial list.
To access a number in the directory while on a call:
Press MENU/SELECT twice to enter the directory.
Press or to scroll to the desired entry.
Press SELECT to dial the displayed number.
To access a number in the caller ID log while on a call:
Press MENU and then press or to select Caller ID log.
Press SELECT and then press or to scroll to the desired entry.
Press SELECT to dial the displayed number.
To access a number in the redial list while on a call:
Press REDIAL.
Press , or REDIAL repeatedly to browse to the desired entry.
Press SELECT to dial the displayed number.
You cannot edit a directory entry while on a call. For more details about the
directory, see page 19.
You cannot copy a caller ID log entry into the directory while on a call. For more
details about the caller ID log, see page 22.
You cannot erase a redial entry while on a call. See page 17 for more details
about the redial memory.
Press CANCEL to exit redial, directory or caller ID log when you are on a call.
•
•
1.
2.
3.
1.
2.
3.
1.
2.
3.
•
•
•
•
To Next Page
Need help?
Frequency
Power
Memory
Weight and Dimensions
