EasyManuals Logo
Home>VTech>Cordless Telephone>CS6114

VTech CS6114 Complete User's Manual

VTech CS6114
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
32
Appendix
Troubleshooting
Other electronic products such as HAM radios and other DECT phones can
cause interference with your cordless phone. Try installing your phone as far
away as possible from these types of electronic devices.
Test a working telephone at the telephone wall jack. If another telephone has the
same problem, the problem is in the telephone wall jack. Contact your telephone
service provider (charges may apply).
The telephone line cord may be defective. Install a new telephone line cord.
Remove and install the battery again and place the handset in the telephone
base or charger.
Wait for the handset to synchronize with the telephone base. Allow up to one
minute for this to take place.
My handset beeps and is not performing normally.
Make sure the power cord is securely plugged into the telephone base. Plug
the telephone base into a different working electrical outlet not controlled by a
wall switch.
Move the handset closer to the telephone base. It may be out of range.
Reset the telephone base by unplugging the electrical power to the base. Wait
for 15 seconds and plug it back in again. Allow up to one minute for the cordless
handset and the telephone base to synchronize.
Other electronic products such as HAM radios and other DECT phones can
cause interference with your cordless phone. Try installing your phone as far
away as possible from these types of electronic devices.
There is interference during a telephone conversation. My calls fade
out when I am using the cordless handset.
The handset may be out of range. Move it closer to the telephone base.
If you subscribe to high-speed Internet service (DSL - digital subscriber line)
through your telephone line, you must install a DSL filter between the telephone
line cord and the telephone wall jack. The filter prevents noise and caller ID
problems caused by DSL interference. Contact your DSL service provider for
more information about DSL filters.
Appliances or other cordless telephones plugged into the same circuit as the
telephone base can cause interference. Try moving the appliance or telephone
base to another outlet.
Other electronic products such as HAM radios and other DECT phones can
cause interference with your cordless phone. Try installing your phone as far
away as possible from these types of electronic devices.

Table of Contents

Other manuals for VTech CS6114

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the VTech CS6114 and is the answer not in the manual?

VTech CS6114 Specifications

Frequency IconFrequency
transmit frequency handset1921.536-1928.448 MHz
transmit frequency telephone base1921.536-1928.448 MHz
Power IconPower
power requirements handset2.4V 400mAh Ni-MH battery
power requirements telephone base6V AC @ 300mA
power requirements charger6V AC @ 300 mA
Memory IconMemory
handset directory30 memory locations; up to 30 digits and 15 characters
handset call log30 memory locations; up to 24 digits and 15 characters
Weight and Dimensions IconWeight and Dimensions
size handset6.50 X 2.0 X 1.26 in (165.0 X 51.0 X 32.0 mm)
size telephone base3.55 X 3.44 X 4.67 in (90.2 X 87.5 X 118.5 mm)
size charger2.91 X 3.19 X 1.85 in (74.0 X 81.0 X 47.0 mm)
weight handset4.59oz (130.0g)
weight telephone base4.32oz (122.6g)
weight charger1.76oz (50.0g)

Related product manuals