2
Getting started
Telephone base and charger installation
Install the telephone base and charger as shown below.
Make sure that the electrical outlet is not controlled by a wall switch.
If you subscribe to digital subscriber line (DSL) high-speed Internet service through
your telephone line, you must install a DSL lter between the telephone line cord
and telephone wall jack. The lter prevents noise and caller ID problems caused
by DSL interference. Contact your DSL service provider for more information about
DSL lters.
Telephone base
Telephone
line cord
Electrical outlet
(not controlled
by a wall switch)
Telephone
wall jack
A DSL lter (not
included) is
required if you have
DSL high-speed
Internet service.
The DSL lter must
be plugged into the
telephone wall jack.
Telephone base
power adapter
Charger
Charger adapter
CAUTION: If you subscribe to telephone service from a cable company or a VoIP
service provider, contact your service provider for more information.
Use only the power adapters and batteries supplied with this product. To order a
replacement, visit our website at www.vtechphones.com or call
1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call
1 (800) 267-7377.
The power adapters are intended to be correctly oriented in a vertical or floor
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling, under-the-table or cabinet outlet.
•
•
To Next Page
Loading...
Need help?
Frequency
Power
Memory
Weight and Dimensions
