VTech CS6120-2 User Manual

Telephone settings
15
Home area code
If you dial local calls using only seven digits (area code not required), you can
program your home area code so that when you receive a call within your local
area, the telephone number is automatically stored in the caller ID log without the
area code.
To change the setting:
Press MENU when the handset is not in use.
Press or until the screen displays Settings, then
press SELECT.
Press or until the screen displays Home area code, then
press SELECT. The screen displays the currently stored home
area code.
Use the dialing keys (0-9) to enter the desired home area code.
Press DELETE to delete a digit.
Press and hold DELETE to delete all digits.
Press SELECT to conrm. You hear a conrmation tone.
If, in the future, your telephone service provider requires you to dial the area code
when making a local call, or, if you move to a location that requires it, delete the
home area code you have already programmed following the steps above. After you
have deleted the home area code, _ _ _ appears.
Dial mode
The dial mode is preset to touch-tone dialing. If you have pulse (rotary) service, you
need to change the dial mode to pulse dialing before using the telephone.
To change the setting:
Press MENU when the handset is not in use.
Press or until the screen displays Settings, then
press SELECT.
Press or until the screen displays Dial mode, then
press SELECT.
Press or to choose Touch-tone or Pulse, then
press SELECT to conrm your selection. You hear a
conrmation tone.
1.
2.
3.
4.
•
•
5.
•
1.
2.
3.
4.
Home area code
Home area code
___
Dial mode
Touch-tone

VTech CS6120-2 Specifications

General

Brand	VTech
Model	CS6120-2
Category	Cordless Telephone
Language	English