VTech CS6120-2 User Manual

34
Answering system settings
Number of rings
You can choose from two, three, four, ve or six rings; or toll saver. With toll saver
selected, the answering system answers after two rings when you have new
messages, and after four rings when you have no new messages. This enables you
to check for new messages and avoid paying unnecessary long distance charges if
you are calling from outside your local area.
Press MENU when the phone is not in use.
Press or to scroll to Answering sys, then press SELECT.
Press or to scroll to Ans sys setup, then press SELECT.
Press or to scroll to # of rings, then press SELECT.
Press or to choose from 6, 5, 4, 3, 2 or Toll saver,
then press SELECT to conrm your selection. You hear a
conrmation tone.
Remote access code
A two-digit security code is required to access the answering
system remotely from any touch-tone telephone. The preset code is
19. You can set the code from 00 to 99.
Press MENU when the phone is not in use.
Press or to scroll to Answering sys, then press SELECT.
Press or to scroll to Ans sys setup, then press SELECT.
Press or to scroll to Remote code, then press SELECT.
Press the dialing keys (0-9) to enter the code, or or to
select from 00 to 99, then press SELECT to conrm your selection. You hear a
conrmation tone.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
# of rings
4
Remote code
Remote code
19

VTech CS6120-2 Specifications

General

Brand	VTech
Model	CS6120-2
Category	Cordless Telephone
Language	English