Find handset
Use this feature to nd all system handsets.
To start paging:
Press /FIND HANDSET on the telephone base
when not in use. All idle handsets ring and display
** Paging **.
To end paging:
Press /FIND HANDSET on the telephone base.
-OR-
Press or any of the dialing keys (0-9, TONE
or #) on a handset.
Press MUTE to turn off the ringer of a handset temporarily. Paging tone continues
on the other handset.
Do not press and hold /FIND HANDSET for more than four seconds. It may
lead to handset deregistration. If the handset displays To register HS and
See manual, refer to Troubleshooting on page 49 to register the handset to
the telephone base.
•
•
•
•
•
To Next Page
Loading...
Need help?
General
