VTech CS6120-2 - Message Alert Tone; Recording Time

35
Message alert tone
When the message alert tone is set to on, and there is at least one new message,
the telephone base beeps every 10 seconds.
To turn this feature on or off:
Press MENU when the handset is not in use.
Press or to scroll to Answering sys, then press SELECT.
Press or to scroll to Ans sys setup, then press SELECT.
Press or to scroll to Msg alert tone, then press SELECT.
Press or to choose On or Off, then press SELECT to
conrm your selection. You hear a conrmation tone.
The answering system must be turned on for the message alert tone to
be functional.
Press any key on the telephone base (except /FIND HANDSET) to temporarily
silence the message alert tone.
Recording time
You can set the recording time for each incoming message.
Press MENU when the handset is not in use.
Press or to scroll to Answering sys, then press SELECT.
Press or to scroll to Ans sys setup, then press SELECT.
Press or to scroll to Recording time, then press SELECT.
Press or to choose 3 minutes, 2 minutes or 1 minute,
then press SELECT to conrm your selection. You hear a
conrmation tone.
1.
2.
3.
4.
5.
•
•
1.
2.
3.
4.
5.
Msg alert tone
Off
Recording time
3 minutes
Answering system settings