VTech CS6449 User Manual

1717
Telephone settings
CID time synchronization
This feature allows the time and date to be set by incoming caller ID information.
The default setting is On.
Press MENU/SELECT when the handset or the telephone
base is not in use.
Press or to highlight >Settings, then press
MENU/SELECT.
Press or to highlight >Set date/time, then press
MENU/SELECT.
Press or to highlight >CID time sync, then press
MENU/SELECT.
Press or to choose >On or >Off.
Press MENU/SELECT to save your selection and return to the
previous menu. You hear a confirmation tone.
Home area code
If you dial your local calls using only seven digits (area code not required), you
can program your home area code so that when you receive a call within your
local area, the telephone number is automatically stored without the area code in
the call log.
Press MENU/SELECT when the handset or the telephone base is not in use.
Press or to highlight >Settings, then press MENU/SELECT.
Press or to highlight >Home area code, then press MENU/SELECT.
Use the dialing keys to enter a three-digit home area code.
Press MUTE/DELETE or OFF/CANCEL on the handset, or
X/DELETE or CANCEL on the telephone base to delete
a digit.
Press and hold MUTE/DELETE on the handset, or
X/DELETE on the telephone base to delete all digits.
Press or to move the cursor to the left or right.
Press MENU/SELECT to save your selection and return to
the previous menu. You hear a confirmation tone.
If, in the future, your telephone service provider requires you to dial the area code
when making a local call, or, if you move to a location that requires it, delete the
home area code you have already programmed, following the steps above. After
you have deleted the home area code, _ _ _ will appear on the display.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
•
•
•
5.
Set date/time
>Home area code
HOME AREA CODE
---
Key tone
>Set date/time
Date & time
>CID time sync
CID TIME SYNC
>On

VTech CS6449 Specifications

General

Brand	VTech
Model	CS6449
Category	Cordless Telephone
Language	English