46
Answering system settings
Answer on/off
The answering system must be turned on to answer and record messages. When
the answering system is turned on, the /ANS ON/OFF light on the telephone
base turns on and ANS ON displays on the handset.
On the telephone base, press /ANS ON/OFF to turn
the answering system on or off. If the answering system
is turned on, the base displays Calls will be answered
and announces “Calls will be answered.” If the answering
system is turned off, the base displays Calls will not be
answered and announces “Calls will not be answered.”
-OR-
When the handset or the telephone base is not in use,
press MENU/SELECT.
Press or to scroll to >Answering sys, then press
MENU/SELECT.
Press or to scroll to >Answer ON/OFF, then press
MENU/SELECT.
Press or to highlight >On or >Off, then press
MENU/SELECT to confirm. You hear a confirmation tone.
When you turn on the answering system at the telephone
base with no memory capacity left, Memory full displays
on the cordless handset and telephone base. The
answering system cannot be turned on and it announces,
“Memory is full. Calls will not be answered.”
If the memory capacity is less than 3 minutes, the
telephone announces, “Less than three minutes to record.”
Less than 3 min to record displays on the cordless
handset and telephone base.
•
•
1.
2.
3.
4.
Calls will be
answered
Calls will not
be answered
Play messages
>Answering sys
ANSWER ON/OFF
>On
>Answer ON/OFF
Ans sys setup
To Next Page
Loading...
Need help?
General
