Telephone operation
24
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to tone dialing
temporarily during a call. This is useful if you need to send touch-tone signals to
access your telephone banking or long distance services.
During a call, press TONE .
Use the dialing keys to enter the number you wish to dial. The telephone
sends touch-tone signals. The telephone automatically returns to pulse dialing
mode after you end the call.
Find handset
This feature helps you nd misplaced handsets.
To start the paging tone:
Press FIND HANDSET on the telephone base and
its screen displays Paging all handsets. All idle
handsets ring and their screens display
** Paging **.
To stop the paging tone:
Press /FLASH,
, or any dialing key (0-9, TONE
or #) on the handset(s).
-OR-
Press FIND HANDSET on the telephone base.
Press OFF/CANCEL or MUTE/DELETE to turn off the ringer
of that handset. Its screen shows Ringer off and .
1.
2.
•
•
•
Paging
all handsets
** Paging **
To Next Page
Loading...
Need help?
General
