VTech CS6449 User Manual

48
Remote access code
A two-digit security code is required to access the answering system remotely from any
touch-tone telephone. The preset code is 19. You can set the code from 00 to 99.
When the handset or the telephone base is not in use, press
MENU/SELECT.
Press or to scroll to >Answering sys, then press
MENU/SELECT.
Press or to scroll to >Ans sys setup, then press
MENU/SELECT.
Press or to scroll to >Remote code, then press
MENU/SELECT.
Use the dialing keys to enter a two-digit number.
Press MENU/SELECT to save and you hear a
confirmation tone.
Message alert tone
When the message alert tone is set to on, and there is at least one new
message, the telephone base beeps every 10 seconds. The message alert tone
is preset to off.
There is no audible alert at the handset.
When the handset or the telephone base is not in use, press
MENU/SELECT.
Press or to scroll to >Answering sys, then press
MENU/SELECT.
Press or to scroll to >Ans sys setup, then press
MENU/SELECT.
Press or to scroll to >Msg alert tone, then press
MENU/SELECT.
Press or to choose >On or >Off.
Press MENU/SELECT to save and you hear a
confirmation tone.
The answering system must be turned on for message alert tone
to beep.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
Remote code
>Msg alert tone
Answer ON/OFF
>Ans sys setup
MSG ALERT TONE
>On
# of rings
>Remote code
Answer ON/OFF
>Ans sys setup
REMOTE CODE
19
Answering system settings

VTech CS6449 Specifications

General

Brand	VTech
Model	CS6449
Category	Cordless Telephone
Language	English