31
Multiple handset use
Using the telephone base:
1. During a call, press INT.
If you have only one handset, the outside call is put on hold and the
telephone base shows Calling HANDSET. The handset rings and shows
Base is calling.
If you have more than one handset, the telephone base shows
INTERCOM TO: Use the dialing keys to eenter a handset number.
The outside call is put on hold and the telephone base shows
Calling HANDSET X. The destination handset shows Base is calling.
2. To answer the call on the destination handset, press, press /FLASH, INT, , or any
dialing key (0-9, TONE or #). The outside call is still on hold and both devices
display Intercom. You can now have a private intercom conversation.
To cancel the transfer and return to the external call before the intercom call is
answered, press CANCEL or INT on the telephone base.
If the destination device does not answer the intercom call within 100 seconds,
or is in the directory or call log, or is out of range, the telephone base shows
Unable to call. Try again and then automatically returns to the external call.
•
•
3. From this intercom call, you have the following options:
You can transfer the call. Press MENU/SELECT
twice to highlight >Transfer on the telephone base.
The telephone base shows Call transferred. The
handset automatically connects to the outside call.
You can let the destination handset join you on the
outside call in a three-way conversation. Press
MENU/SELECT. Press or to highlight
>Share call, then press MENU/SELECT.
You can press INT on the telephone base to
alternate between the outside call (Outside call
appears) and the intercom call (Intercom appears).
You can end the intercom call and continue the
outside call on the telephone base. Press CANCEL on the telephone base
(the other party hears four beeps), or the other party can press OFF/CANCEL
on the handset.
•
•
•
•
•
•
>Transfer
Share call
12:23PM 3/19
Call
Transferred
12:23PM 3/19
Outside call
12:23PM 3/19
To Next Page
Loading...
Need help?
General
