Install the handset battery as shown below.
NOTES
• Use only supplied battery.
• If the handset will not be used for a long time, disconnect and remove the battery to prevent possible leakage.
Install the headset battery
Install the headset battery as shown below.
NOTE
• Use only supplied battery.
Check the battery level
After you have installed the battery, check the battery level on the handset screen.
If the battery icon is , or , then go to Before use section to set the date and time, and set the answering system through voice guide.
If the screen is blank, or flashes, then the battery needs to be charged. Go to Charge the battery section before you do any setting or operation.
Charge the battery
Place the handset in the telephone base or the charger to charge.
Place the headset on the telephone base to charge.
To Next Page
Loading...
Need help?
Transmit Frequency
